| Title |
Description |
Release
Date |
| Delcam to show expanded
range of five-axis machining options at MTA |
Delcam will demonstrate the full range of options for both positional and continuous five-axis machining within its PowerMILL CAM system at the MTA exhibition to be held in Singapore from 10 th to 14 th May. The range now includes machining through a point or to a point, or to or from a 3D curve; programming using a reference surface; swarf machining from a surface or from wireframe; and five-axis trimming, pocketing and drilling. |
April 05 |
| Delcam to show CADCAM benefits to dental industry in Germany |
Delcam will demonstrate applications of its Power Solution range of CADCAM software in the dental industry at the IDS dental technology exhibition to be held in Cologne, Germany, from 12 th to 16 th April. Although CADCAM and reverse engineering tend to be associated with engineering applications, Delcam believes that the dental industry can use similar methods to reduce costs and improve quality. |
April 05 |
| Delcam to launch FeatureCAM in Korea at Die-Mold exhibition |
Delcam’s Hankook Delcam office will launch its recently acquired FeatureCAM range of CADCAM software in Korea at the Die-Mold Korea exhibition to be held in Seoul from 14 th to 18 th April . FeatureCAM compliments Delcam’s established Power Solution range of software with cutting-edge CADCAM programming techniques for production machining, incorporating feature-based, knowledge-based, and automatic feature recognition technologies. |
April 05 |
| Delcam to show On-Machine Verification on DMG machine at Control |
At the Control exhibition to be held in Sinsheim, Germany, from 26 th to 29th April, Delcam will demonstrate on-machine verification with its PowerINSPECT inspection software on a DMG machine tool fitted with Renishaw probing. The latest version of PowerINSPECT allows off-line programming of the inspection sequence for the machine tool, with fully-integrated simulation, and so minimises the time taken on the machine for the verification operation. |
April 05 |
| Delcam to focus on mould design and inspection at Die-Mold Korea |
Delcam will demonstrate the latest developments in its software for mould design and inspection at the Die-Mold Korea exhibition to be held in Seoul from 14 th to 18 th April . Recent enhancements in both the PS-Moldmaker design software and the PowerINSPECT inspection system will allow users to benefit from even greater improvements in productivity, cost-effectiveness and delivery times. |
March 05 |
| Delcam to show latest in CADCAM for อากาศยาน at Paris Air Show |
Delcam will demonstrate the latest developments in its Power Solution CADCAM systems for the design and manufacture of metal and composite อากาศยาน components at the Paris Air Show to be held from 13 th to 19 th June. Like all areas of manufacturing, อากาศยาน companies and their subcontractors are under pressure to increase productivity, reduce costs, improve quality and shorten delivery times. At the exhibition, Delcam will show how its software can help meet these demands. |
March 05 |
| Delcam to launch new CNC version of PowerINSPECT at Quality Expo |
Delcam will demonstrate new CNC-based inspection techniques in its PowerINSPECT inspection software at the Quality Expo to be held in Rosemont, Illinois, from 19 th to 21 st April. The new CNC capabilities will allow PowerINSPECT to be programmed off-line for the inspection of sample parts against a master CAD model during production. Previously, the software could only undertake repeated inspection cycles through teach-and-learn methods. |
March 05 |
| Delcam to demonstrate complete CADCAM system for footwear at SIMAC |
Delcam will demonstrate the world’s only complete CADCAM system for the design and manufacture of footwear on stand A35-B32 at the SIMAC exhibition to be held in Bolonga, Italy, from 26 th to 29 th April. The company will use this leading exhibition for the industry to reinforce its position as the world’s leading supplier of CADCAM to footwear manufacturers. |
March 05 |
| Delcam to show five-axis and adaptive machining options at CIMT |
Delcam will demonstrate its latest developments in five-axis machining and adaptive machining on stand 305 in Hall 6 of the CIMT exhibition to be held in Beijing from 11 th to 17 th May. Both these technologies are being used increasingly by small and large companies seeking to increase manufacturing productivity, reduce delivery times and improve quality in a wide range of applications. |
March 05 |
| Delcam offers opportunity to meet five-axis machining experts |
Delcam is to host two days of free workshops entitled “Five-axis Machining – Meet the Experts” at its Birmingham headquarters on 13 th and 14 th April. Each day will be made up of presentations on various aspects of five-axis technology in the morning, with live machining demonstrations in Delcam’s Tooling Services Division in the afternoon. The workshops are aimed at encouraging companies both large and small to increase their productivity and their competitiveness with the latest machining technology. |
March 05 |
| Delcam to demonstrate full range of five-axis machining options at EASTEC |
Delcam will demonstrate the full range of options for both positional and continuous five-axis machining within its PowerMILL CAM system at the EASTEC exhibition to be held in Springfield, Mass. from 24 th to 26 th May. The range now includes machining through a point or to a point, or to or from a line; programming using a reference surface; swarf machining; and five-axis trimming, pocketing and drilling. |
March 05 |
| Delcam to show new five-axis machining and inspection options at Industrie |
Delcam will demonstrate the full range of options for both positional and continuous five-axis machining within its PowerMILL CAM system at the Industrie exhibition to be held in Lyon from 8 th to 11 th March. The company will also show the latest developments in its PowerINSPECT inspection software with demonstrations on a Romer portable CMM and an Acticm stereo photogrammetry inspection system. |
March 05 |
| Delcam to demonstrate Total Modelling design system at Solid Modelling |
At the Solid Modelling Show to be held at the NEC, Birmingham, on 27 th and 28 th April, Delcam’s will demonstrate its unique Total Modelling system for product design and decoration. Recent developments in the software mean that it now provides the fastest method for the early “What if?” stage of concept design, allowing a far greater number of alternative proposals to be created and compared in a much shorter time. |
March 05 |
| Delcam to feature new design solution at MICAD |
Delcam will demonstrate the latest version of its PowerSHAPE hybrid modelling software on stand D13 at the MICAD exhibition to be held in Paris from 5 th to 7 th April. PowerSHAPE Pro offers a complete solution for designers of complex shapes such as those found in the packaging, sports equipment, footwear and electrical appliance industries. It includes all of the surface and solid modelling capabilities within PowerSHAPE, together with the PS-Draft drafting software and the PS-Render system for generating photo-realistic images. |
March 05 |
| Delcam Partner to
highlight five-axis and high-speed machining at TECMA |
Delcam’s Mexican Sales Partner TCM will demonstrate the latest
techniques for five-axis machining and high-speed machining on booth
717 at the TECMA exhibition to be held in Mexico City from 8th to
11th March. These techniques are currently moving from their current
specialist applications into more general use in all areas of manufacturing
industry. |
March 05 |
| Delcam to
show complete CADCAM system for footwear in Latin America |
Delcam will demonstrate the latest developments in its complete
CADCAM solution for the design and manufacture of footwear at two
exhibitions in Latin America. The first is the ANPIC exhibition to
be held in Leon, Mexico, from 26 th to 28 th February; the second
the FIMEC show in Novo Hamburgo, Brazil, from 19 th to 22 nd April.
|
February 05 |
| Delcam to launch
new CNC version of PowerINSPECT at Control |
Delcam will demonstrate new CNC-based inspection techniques in its
PowerINSPECT inspection software at the Control exhibition to be held
in Sinsheim, Germany from 26 th to 29 th April. The new CNC capabilities
will allow PowerINSPECT to be programmed off-line for the inspection
of sample parts against a master CAD model during production. Previously,
the software could only undertake repeated inspection cycles through
teach-and-learn methods. |
February 05 |
| Delcam to demonstrate
new electrode design system at Expostampo |
Delcam will demonstrate the latest release of its automated electrode
design system, PS-Electrode, at the Expostampo exhibition in the Ancona
area of Italy from 26 th to 28 th March. The new version offers an
even wider range of customisation options together with the ability
to simulate the action of the electrode. It also includes a comprehensive
Erowa catalogue of blanks and holders, alongside the previous Hirschman
and System 3R catalogues. In addition, data from PS-Electrode can
now be output directly to the Charmilles control as well as to the
Agievision control used by Agie EDM machines. |
February 05 |
| Delcam to show
On-Machine Verification on Mazak machine at Eurostampi |
At the Eurostampi exhibition to be held in Parma, Italy, from 31
st March to 2 nd April, Delcam will demonstrate on-machine verification
with its PowerINSPECT inspection software on a Mazak machine tool
fitted with Renishaw probing. The latest version of PowerINSPECT allows
off-line programming of the inspection sequence for the machine tool,
with fully-integrated simulation and collision checking, and so minimises
the time needed for the verification operation. |
February 05 |
| Delcam to
show Delcam to hold free “3D Mould Design” workshop at
PDM show |
Delcam is to hold a free workshop on “3D Mould Design”
during the opening day of the Plastics Design & Moulding Exhibition
to be held in Telford, UK, from 12 th to 14 th April. This will highlight
the advantages designers of injection mould tools can gain by moving
from processes based on traditional two-dimensional drawings to new
methods based on three-dimensional computer models. |
February 05 |
| Delcam to highlight
latest machining and inspection techniques at TIMTOS |
Delcam will highlight the company’s latest developments in
its machining and inspection software on Booth G0440 at the TIMTOS
machine tool show to be held in Taipei from 15 th to 20 th March.
The company will also present a seminar on 5-axis and high-speed machining
during the exhibition, on the afternoon of 17 th March. Delcam is
the developer of both PowerMILL, the world’s leading specialist
CAM system, and PowerINSPECT, the world’s leading hardware-independent
inspection software. |
February 05 |
| Delcam
to support Siemens อากาศยาน workshops |
Delcam is to support machine tool control developer Siemens in a
series of workshops on the latest developments in อากาศยาน machining
to be held throughout the USA over the coming months. At the workshops,
which start with meetings in Dallas on 15 th February and Wichita
on 23 rd February, Delcam will highlight its newest strategies for
five-axis machining of อากาศยาน structures and engine components.
|
February 05 |
| Delcam
to host free “Opportunities in Composites” seminar |
Delcam is to host a half-day seminar entitled “New Opportunities
in Composites Manufacture ” at its Birmingham headquarters on
Thursday 17 th March. The seminar, which is free of charge, is being
supported by the National Composites Network and will include a presentation
from NCN outlining how the programme can help companies either wanting
to enter the composites industry or wishing to expand their business
in the sector. |
February 05 |
| Delcam to host
CADCAM Clinic at PDM Exhibition |
Delcam is to host a CADCAM Clinic at the Plastics Design & Moulding
Exhibition to be held in Telford, UK, from 12 th to 14 th April. At
the Clinic, Delcam’s experts will demonstrate how the latest
CADCAM techniques can improve efficiency at every stage of plastics
product development from concept design to tooling manufacture. In
particular, the company will focus on methods for developing more
complex designs more quickly and to a higher quality. |
February 05 |
| Delcam continues
to expand and improve on the full suite of Power Solution products |
At the Westec Exhibition, April 4 –7, in Los Angeles, California,
visitors to Delcam, booth #3368, will be able to see the latest developments
in PowerMILL, the world’s leading specialist CAM system, PowerSHAPE,
the only hybrid modeller that can build solids and surfaces from wireframe,
manipulate surfaces within solids directly and make global changes
to solid features, PowerINSPECT, the complete CAD-based inspection
solution, and ArtCAM Pro, the easiest-to-use software program to design
and produce decorative products directly from 2D artwork. |
January 05 |
| Delcam to show latest
in CADCAM for composites at JEC exhibition |
Delcam will demonstrate the latest developments in its CADCAM systems
for the composites industry at the JEC exhibition to be held in Paris
from 5 th to 7 th April. New features on display will include methods
for the generation of 2D patterns for prepregs from 3D models of components,
improved nesting to ensure the most economic use of materials cut
from sheet and an increased range of five-axis machining methods,
both for the manufacture of patterns and tooling and also for the
trimming and drilling of moulded parts. |
January 05 |
| Delcam
to repeat Asian seminars on CADCAM system for footwear |
Following the success of its initial round of seminars for the Asian
footwear industry, Delcam is to give a second series of free presentations
for the region’s shoemaking companies. The new series will start
in Jakarta, Indonesia, on 25 th February, followed by Manila, Philippines,
on 28 th February and Kuala Lumpur, Malaysia, on 4 th March, and end
in Vietnam with meetings in Hanoi on 8 th March and Ho Chi Min City
on 10 th March. |
January 05 |
| Delcam to show
latest jewellery design and manufacture software at Spring Fair |
Delcam will demonstrate the latest version of its ArtCAM JewelSmith
software for the jewellery industry at the Spring Fair to be held
at the NEC, Birmingham, from 6 th to 10 th February. The software
is already widely used by designers, model makers and manufacturers
of all types of jewellery, whether it is bespoke, custom-made pieces
or mass-produced items. In all cases, it has given improved productivity,
higher quality and significantly reduced lead times. |
January 05 |
| Delcam to focus
on CADCAM system for footwear at Vietnam show |
Delcam will highlight its complete CADCAM solution for the design
and manufacture of footwear at the MTA 2005 exhibition to be held
in Ho Chi Min City from 9 th to 12 th March. Delcam is already the
world’s leading supplier of CADCAM systems to the footwear industry.
The company’s new module for the design and manufacture of shoe
uppers, when coupled with the well-established PS-Shoemaker software
for soles, makes Delcam the only software developer able to offer
a total solution for the development of complete footwear products.
|
January 05 |
| Delcam
to host free Machining and Inspection Workshop at Autosport show |
Delcam is to host a free workshop on the latest developments in
machining and inspection technology at the NEC, Birmingham, on 13th
January, the first day of the Autosport Engineering Exhibition. The
workshop will show how these techniques can help all companies looking
to improve quality and boost productivity, especially those that need
to produce complex prototypes, tooling or components in shorter lead
times. |
November 04 |
| Delcam to highlight
design software at Medical Device Technology |
Delcam will demonstrate the latest version of its PowerSHAPE hybrid
modelling CAD software at the Medical Device Technology exhibition
to be held at the NEC, Birmingham, on 16th and 17th February. PowerSHAPE
Pro offers a complete solution for designers in medical applications
where aesthetics or ergonomics are key considerations, including the
design and manufacture of medical equipment, pharmaceutical packaging,
prostheses and bespoke footwear.
|
November 04 |
| Delcam to demonstrate
latest CADCAM developments in Indonesia |
Delcam’s will demonstrate the latest developments in its Power
Solution range of design, manufacturing and inspection software at
the Manufacturing Indonesia exhibition in Jakarta from 8th to 11th
December. The software, which is all based on Delcam’s own kernel,
allows users to boost productivity, improve quality and reduce lead
times, and so increase profitability at every stage, from the creation
of a concept design through to the manufacture and inspection of prototypes,
tooling and sample components. |
November 04 |
| Delcam
to show five-axis machining developments at Autosport show |
Delcam will show how its recent developments in machining and inspection
technology can improve quality and boost productivity in the autosport
industry at the Autosport Engineering Show to be held at the NEC,
Birmingham, on 13th and 14th January. Particular attention will be
given to recent innovations in five-axis machining with the latest
release of Delcam’s PowerMILL 5.5 CAM system, plus new functionality
in the PowerINSPECT software for on-machine verification. |
Novemebr 04 |
| Delcam to show
five-axis and high-speed machining techniques in Thailand |
Delcam will demonstrate its latest five-axis machining and high-speed
machining techniques at the Thaimetalex exhibition to be held in Bangkok
from 18th to 21st November. The demonstrations are part of Delcam’s
campaign to encourage Asian companies, both large and small, to increase
their productivity and their competitiveness with the latest machining
technology. |
November 04 |
| Delcam,
DMG and Sandvik to bring new technology to mould and die industry |
Delcam reseller SEACAM will join forces with machine tool manufacturer
DMG and cutting tool specialists Sandvik to host three free seminars
on new technology for the mould and die industry in Brazil. The seminars,
which will be held in Caxias do Sul on 3rd November, Sao Leopoldo
on 4th November and Sao Paulo on 17th November, are aimed at encouraging
companies both large and small to increase their productivity and
their competitiveness with the latest machining technology. |
November 04 |
| Delcam offers
free machining and inspection seminar for autosport industry |
Delcam will demonstrate how the latest developments in machining
and inspection technology can improve quality and boost productivity
at a free seminar at its Birmingham headquarters on 10th November.
While the seminar is aimed principally at autosport applications,
the programme will be of interest to all companies looking to produce
complex prototypes, tooling or components in shorter lead times and
at reduced cost. |
October 04 |
| Delcam
to show complete CADCAM system for footwear at Asian seminars |
Delcam is to reinforce its position as the leading supplier of CADCAM
systems to the world’s footwear industry with a series of free
seminars in the main shoemaking regions of Asia. The seminars will
start in Pusan, Korea, on 22nd October, followed by Taichung, Taiwan,
on 25th, and Wenzhou and Donguan in China on 27th and 29th, and end
in Bangkok, Thailand on 2nd November. |
October 04 |
| Delcam
to show electrode design and 5-axis machining at Agie-Charmilles event |
Delcam will demonstrate its latest developments in automated electrode
design with its PS-Electrode software and five-axis machining with
its PowerMILL CAM system at an Agie-Charmilles Open House to be held
at the company’s new Coventry premises from 19th to 21st October.
|
October 04 |
| Delcam to
show Total Modelling design system at China Industrial Design Week |
Delcam will demonstrate the latest versions of its PowerSHAPE hybrid
modelling software and its ArtCAM software for artistic CADCAM at
the China Industrial Design Week exhibition to be held in Wuxi, China
from 18th to 21st October. The company will also show how these two
programs can be combined in its Total Modelling system that offers
a complete solution for designers of complex shapes including those
found in the footwear, packaging, toy, sports equipment and electrical
appliance industries. |
October 04 |
| Delcam to hold
free seminar on integration of machining and inspection |
Delcam is to host a free seminar showing how closer integration
of machining and inspection operations can improve quality and boost
productivity as part of the Productivity Partnerships 04 event to
be hosted by the 600 Centre at its Shepshed site from 19th to 21st
October. The seminar, titled Innovation and Integration in Machining
and Inspection, will take place on the afternoon of 19th October. |
October 04 |
| Delcam
to demonstrate On-Machine Verification at Productivity Partnerships |
Delcam will demonstrate the new version of its PowerINSPECT inspection
software that can be used for on-machine verification as well as for
inspection on coordinate measuring machines and other inspection devices
at the Productivity Partnerships 04 event to be hosted by the 600
Centre at its Shepshed site from 19th to 21st October. The company
will also demonstrate high-speed and five-axis machining with its
PowerMILL CAM system. |
October 04 |
| Delcam to demonstrate
intelligent 3D mould design at Euromold |
Delcam will demonstrate the latest release of its PS-Moldmaker 3D
mould design software, PS-Moldmaker, at the Euromold exhibition to
be held in Frankfurt from 1st to 4th December. PS-Moldmaker provides
a unique combination of automation to speed the design process and
flexibility to manage design changes efficiently. |
September 04 |
| Rapid
Manufactured Custom-fit Products Kicks Off in Birmingham UK |
The Kick Off meeting of one of the Main European Research Projects
took place on 21st&22nd September at the DELCAM plc. Facilities.Custom-Fit
is a major new investment by Europe in the future of manufacturing
technology. This major research project was selected over more than
200 proposals presented last year to the principal EU research program. |
September 04 |
| Delcam to show benefits
of machining and inspection integration at JIMTOF |
Delcam will demonstrate how closer integration of machining and
inspection operations can improve quality and boost productivity at
the JIMTOF exhibition to be held at the Big Site in Tokyo from 1st
to 8th November. Delcam is the developer of both PowerMILL, the world’s
leading specialist CAM system, and PowerINSPECT, the world’s
leading hardware-independent inspection software. |
Septemebr 04 |
| Delcam to show
latest machining and inspection techniques at Japan อากาศยาน |
Delcam will highlight the company’s latest developments in
the machining and inspection of อากาศยาน components and structures
at the Japan อากาศยาน Show to be held in Yokohama from 6th to 10th
October. Delcam is the developer of both PowerMILL, the world’s
leading specialist CAM system, and PowerINSPECT, the world’s
leading hardware-independent inspection software. |
September 04 |
| Delcam to highlight
machining software at IBEX boat building show |
Delcam will demonstrate its full range of design to manufacture
CADCAM software on booth number 1247 at the IBEX boat building exhibition
to be held from October 25th to 27th at the Miami Beach Convention
Center. Particular attention will be given to the PowerMILL computer-aided
manufacturing system. This is gaining increased acceptance in the
marine industry as more and more boat-builders move from traditional
manufacturing methods to the use of computer-controlled machining. |
September 04 |
| Hankook Delcam
prepares for largest ever User Meeting |
Staff at Delcam’s Korean joint venture, Hankook Delcam, are
preparing for the company’s largest ever User Meeting following
sales to a record number of new customers during the first half of
this year. The previous best attendance of 700 delegates is expected
to be passed for this year’s Meeting to be held on 27th and
28th August. |
August 04 |
| Delcam
to show latest machining and inspection techniques at Aero-Engine
Expo |
Delcam will demonstrate its latest techniques for machining and
inspection of อากาศยาน components at the Aero-Engine Expo to be held
at London’s Olympia Conference Centre on 29th and 30th September.
In addition, CAM Development Director Steve Hobbs will present a paper
on the company’s most recent developments in its PowerMILL CAM
system and PowerINSPECT inspection software at the conference that
will run alongside the exhibition. |
August 04 |
| Delcam to preview
new On-Machine Verification system at IMTS |
At IMTS, Delcam will preview a new version of its PowerINSPECT inspection
software that can be used for on-machine verification as well as for
inspection on coordinate measuring machines and other inspection devices.
This version will allow off-line programming of the inspection sequence
for the machine tool, with fully-integrated simulation and collision
checking, and so minimise the time needed for the verification operation. |
August 04 |
| Delcam’s
new jewellery design and manufacture software on preview in Canada |
Canadian jewellery manufacturers will have their first opportunity
to see the forthcoming version of Delcam’s ArtCAM JewelSmith
software on the booth of reseller Cutting Edge at the Jewellery World
Expo to be held in Toronto from 8th to 10th August. The current version
of the software is already used internationally by designers and manufacturers
of all types of jewellery, including bespoke, custom-made pieces and
mass-produced items. In all cases, it has given improved productivity,
higher quality and significantly reduced lead times. |
August 04 |
| Delcam to host
AAU Conference on อากาศยาน Materials and Manufacturing |
CADCAM developer Delcam is to host a major conference organised
by the Association of อากาศยาน Universities on อากาศยาน Materials
and Manufacturing at its Birmingham headquarters on 20th and 21st
October 2004. The conference will feature presentations on current
research programmes under way at the Association’s member universities,
together with a number of contributions from industry. |
July 04 |
| Delcam
reseller SEACAM to offer faster plastics product development in Brazil |
Delcam reseller SEACM will show how the latest versions of the Power
Solution range of CADCAM software can speed the development of new
plastics products on the SOCIESC stand at the Interplast exhibition
to be held in Joinville from 20th to 24th August. New releases to
be featured include PowerSHAPE Pro, a complete solution for designers
of complex shapes such as those found in the footwear, packaging,
sports equipment and electrical appliance industries, PS-Moldmaker,
the intelligent 3D mould design software, and PowerMILL 5.5, the recent
update to the world-leading CAM system. |
July 04 |
| Delcam to show new
signmaking software in Paris |
Delcam will demonstrate the latest version of its ArtCAM Pro software
for the signmaking industry at the VISCOM Europe exhibition to be
held in Porte de Versailles, Paris from 15th to 17th September. ArtCAM
Pro 7 features a range of enhancements for both the design and manufacture
of artistic shapes, including new functionality that enables quick
and easy creation of CAD models of human face profiles from digital
images. |
July 04 |
| Delcam to feature
new design solution at Kunststoffe exhibition |
Delcam will demonstrate the latest version of its PowerSHAPE hybrid
modelling software at the Kunststoffe exhibition to be held in Dusseldorf
from 20th to 27th October. PowerSHAPE Pro offers a complete solution
for designers of complex shapes such as those found in the footwear,
packaging, sports equipment and electrical appliance industries. It
includes all of the surface and solid modelling capabilities within
PowerSHAPE, together with the PS-Draft drafting software and the PS-Render
system for generating photo-realistic images. |
July 04 |
| Delcam to launch
new range of adaptive machining methods at BI-MU |
Delcam will stage the European launch of its new range of adaptive
machining solutions at the BI-MU exhibition to be held in Milan
from 1st to 6th October. The new techniques will help companies
to overcome a variety of manufacturing challenges in both toolmaking
and production machining operations. They are based on Delcam’s
unique combination of expertise in software for both machining and
inspection, which has been built up over many years of development
of PowerMILL, the world’s leading specialist CAM system, and
PowerINSPECT, the leading hardware-independent inspection software. |
July 04 |
| Delcam to feature new
design solution at TCT exhibition |
Delcam will demonstrate the latest version of its PowerSHAPE hybrid
modelling software at the Time Compression Technologies exhibition
to be held at the NEC, Birmingham, from 28th to 30th September. PowerSHAPE
Pro offers a complete solution for designers of complex shapes such
as those found in the packaging, sports equipment, footwear and electrical
appliance industries. It includes all of the surface and solid modelling
capabilities within PowerSHAPE, together with the PS-Draft drafting
software and the PS-Render system for generating photo-realistic images. |
July 04 |
| Delcam
Hong Kong to show CADCAM software at Jewellery & Watch expo |
Delcam Hong Kong will demonstrate the latest versions of its PowerSHAPE
and ArtCAM JewelSmith software at the Jewellery and Watch exhibition
to be held in Hong Kong, from 19th to 23rd September. These programs
are already widely used by designers, model makers and manufacturers
of all types of luxury goods, including bespoke, custom-made pieces
and mass-produced items. In all cases, they have given improved productivity,
higher quality and significantly reduced lead times. |
July 04 |
| Delcam to launch new
jewellery design and manufacture software at IJL |
Delcam will launch the latest version of its ArtCAM JewelSmith software
for the jewellery industry at the IJL exhibition to be held in Earl’s
Court, London, from 5th to 8th September. The software is already
widely used by designers, model makers and manufacturers of all types
of jewellery, whether it is bespoke, custom-made pieces or mass-produced
items. In all cases, it has given improved productivity, higher quality
and significantly reduced lead times. |
July 04 |
| Delcam
to show new woodworking software at IWF in Georgia |
Delcam will demonstrate the latest version of its ArtCAM Pro software
for the signmaking and woodworking industries on booth 4844 in the
International Woodworking Fair to be held from August 26th to 29th
at the Georgia World Congress Center in Atlanta, Georgia. ArtCAM Pro
7 features a range of enhancements for both the design and manufacture
of artistic shapes, including new functionality that enables quick
and easy creation of CAD models of human face profiles from digital
images. The software is already used in a wide range of woodworking
applications, including the production of signs, furniture and architectural
decoration. This latest release is expected to consolidate the software’s
leading position in all these applications. |
July 04 |
| Delcam’s
Mexican reseller TCM to hold first User Meetings |
Delcam’s reseller in Mexico, TCM, is to hold a series of User
Meetings during July. The Meetings, which will be the first to be
held in the country, will take place in Monterrey on 13th July and
León on 15th, in both cases at the campus of the local ITESM
university, and in Mexico City on 16th, at the ITAM university. In
each case, presentations will cover developments across Delcam’s
complete Power Solution software range and show how they can provide
users with more cost-effective methods to take complex-shaped products
from concept to reality. |
July 04 |
| Delcam reseller
MultiCAM to demonstrate complete CADCAM solution |
Delcam’s Argentinean reseller MultiCAM will demonstrate the
company’s complete Power Solution range of CADCAM software at
the FIMAQH 2004 exhibition to be held in Buenos Aires from 6th to
11th July. The Power Solution supports the complete product development
process from initial concept design through to the manufacture and
inspection of components.
|
July 04 |
| Delcam offers
free workshop on high-speed and five-axis machining in Mexico |
Leading CADCAM developer Delcam, in association with its reseller
TCM, is to hold a free workshop on high-speed and five-axis machining
for Mexican toolmakers and production machining companies looking
to invest in this technology or to improve the productivity of their
existing equipment. The workshop will be held on 12th July at the
ITESM university in Monterrey. |
July 04 |
| Delcam to launch new
range of adaptive machining methods at IMTS |
At this year’ IMTS exhibition, Delcam will launch a new range
of adaptive machining solutions to overcome a variety of manufacturing
challenges in both toolmaking and production machining operations.
The new techniques are based on Delcam’s unique combination
of expertise in software for both machining and inspection, which
has been built up over many years of development of PowerMILL, the
world’s leading specialist CAM system, and PowerINSPECT, the
leading hardware-independent inspection software. |
June 04 |
| Delcam to demonstrate
3D mould design at Italian Mouldmaking Show |
Delcam will demonstrate the latest release of its PS-Moldmaker mould
design software at the Expostampo exhibition in the Ancona area of
Italy from 4th to 6th June. Together with the other programs in Delcam’s
Power Solution range of CADCAM software, PS-Moldmaker allows designers
of injection mould tools to move successfully from processes based
on two-dimensional drawings to new methods based entirely on three-dimensional
computer models. |
May 04 |
| Delcam to highlight
latest machining and inspection techniques at Farnborough |
Delcam will highlight the company’s latest developments in
the machining and inspection of อากาศยาน components and structures
on the Society of British อากาศยาน Companies stand at the Farnborough
Air Show. Delcam is the developer of both PowerMILL, the world’s
leading specialist CAM system, and PowerINSPECT, the world’s
leading hardware-independent inspection software. |
May 04 |
| Delcam to show
new woodworking software at Milan |
Delcam will demonstrate the latest version of its ArtCAM Pro software
for the signmaking and woodworking industries at the Xylexpo exhibition
to be held at the Fiera di Milano in Milan from 26th to 30th May.
ArtCAM Pro 7 features a range of enhancements for both the design
and manufacture of artistic shapes, including new functionality that
enables quick and easy creation of CAD models of human face profiles
from digital images. The software is already used in a wide range
of woodworking applications, including the production of signs, furniture
and architectural decoration. This latest release is expected to consolidate
the software’s leading position in all these applications. |
May 04 |
| Delcam to demonstrate
3D mould design at Cleveland Moldmaking Expo |
Delcam will demonstrate the latest release of its PS-Moldmaker mould
design software at the Moldmaking Expo to be held in Cleveland from
22nd to 24th June. PS-Moldmaker provides a powerful, highly-automated
system that will allow designers of injection mould tools to move
from processes based on two-dimensional drawings to new methods based
on three-dimensional computer models. |
April 04 |
| Delcam to launch
new PowerMILL CAM software in Brazil |
Delcam will launch its the latest release of the company’s
PowerMILL CAM software in South America at the Feira de Mecanica machine
tool exhibition in Sao Paulo, Brazil from 18th to 22nd May. PowerMILL
5.5 will incorporate a range of enhancements, including the ability
to use the stock model for five-axis machining operations, dedicated
methods for machining of flat surfaces, the ability to use user-defined
tools and collision checking within the new simulation module. In
addition, the user interface has been improved with the use of Windows
XP style icons and with the wider user of colour to define different
areas of the model. |
April 04 |
| Delcam previews
on-machine verification at Quality Show |
At the Quality Show to be held in Novi, Michigan on 9th and 10th
June, Delcam will preview a new version of its PowerINSPECT inspection
software that can be used for On-Machine Verification (OMV) as well
as for inspection on CMMs and other inspection devices. This version
will allow off-line programming of the inspection sequence for CNC
machine tools, with fully-integrated simulation and collision checking,
and so minimise the time needed for the verification. |
April 04 |
| Delcam to show
finishing of Airbus composite part by robot at MACH |
On stand 5371 at MACH, Delcam will demonstrate the finishing by
robot of a composite wing spar test section supplied by Airbus. This
will show how robots could provide a more cost-effective option than
conventional machine tools for the finishing of large components made
from softer materials. Typically with composite components, there
will be some flash from the moulding operation that needs to be removed
before assembly into the aircraft structure. |
April 04 |
| Delcam to
host five-axis and high-speed machining seminars |
Delcam is to host two days of seminars on five-axis machining and
high-speed machining as part of its campaign to move these techniques
from their current specialist applications into the mainstream of
manufacturing practice. The seminars, which are to be held at Delcam’s
Birmingham headquarters on 19th and 20th May, are aimed at encouraging
companies both large and small to increase their productivity and
their competitiveness with the latest machining technology. |
April 04 |
| Delcam to demonstrate
3D mould design at Shanghai die and mould exhibition |
Delcam will demonstrate the latest release of its PS-Moldmaker mould
design software at the Die & Mould China exhibition to be held
in Shanghai from 12th to 16th May. PS-Moldmaker provides a powerful,
highly-automated system that will allow designers of injection mould
tools to move from processes based on two-dimensional drawings to
new methods based on three-dimensional computer models. |
April 04 |
| Delcam to demonstrate
complete CADCAM system for footwear at SIMAC |
Delcam will demonstrate the latest developments in its complete
CADCAM solution for the design and manufacture of footwear at the
SIMAC exhibition to be held in Bolonga, Italy, from 27th to 30th April.
These will include improvements in the speed and ease of use of its
Total Modelling design system, a new module for the design and manufacture
of shoe uppers, additional options in the CopyCAD reverse engineering
software, and an even wider range of strategies in the PowerMILL CAM
system. |
April 04 |
| Delcam previews
on-machine verification with off-line programming at Control |
On stand 6208 at the Control exhibition to be held in Sinsheim from
11th to 14th May, Delcam will preview a new version of its PowerINSPECT
inspection software that can be used for On-Machine Verification (OMV)
as well as for inspection on CMMs and other inspection devices. This
version will allow off-line programming of the inspection sequence
for CNC machine tools, with fully-integrated simulation and collision
checking, and so minimise the time needed for the verification. |
March 04 |
| Delcam chosen
for Eurostampi design and manufacturing display |
Delcam is pleased to announce that the company’s Power Solution
software has again been chosen for the “From Design to Object”
centrepiece of this year’s Eurostampi exhibition, the main Italian
exhibition for mould manufacturers and users. At the event, to be
held at the Parma Exhibition Centre from 25th to 27th March, a novel
desk organiser will produced called “Eurotasco”. |
March 04 |
| Delcam to sponsor
international toolmaking conference |
Delcam, the leading specialist supplier of CADCAM systems to the
global toolmaking industry, is pleased to announce that it will sponsor
the 11th International Conference of the International Special Tooling
& Machining Association (ISTMA). The Conference is to be held
in Bangkok on 9th to 15th May, the first time that it has been held
in Asia. |
March 04 |
| Free seminars
for Mexican footwear industry |
Delcam’s Mexican reseller, TCM, is to describe the use of
the latest CADCAM techniques for shoe design and manufacture at two
free seminars. The seminars, which will take place in Guadalajara
on 23rd March and in Leon on 25th March, will cover the various stages
of the development of a new design and will show how the use of Delcam’s
CADCAM systems can provide benefits at all stages of the process. |
March 04 |
| Delcam France to
show new morphing options in PowerSHAPE at MICAD |
Following its most successful year ever in 2003, Delcam France will
be looking for a further boost in its sales at the MICAD exhibition
to be held in Paris, from 30th March to 1st April. The coompany will
demonstrate the extended range of morphing, or whole model editing,
options within its PowerSHAPE hybrid modeller. Additional options
within the latest release of PowerSHAPE include a new morphing method
based on a control surface, the ability to retain the shape of features
wrapped onto an underlying surface that is being modified, and the
ability to undertake multiple morphs of different types on a surface
or solid. |
March 04 |
| Delcam
launches new PowerMILL CAM software |
Delcam has introduced the latest version of the company’s
PowerMILL CAM software. PowerMILL 5 offers easier programming despite
the inclusion of an even wider range of strategies. Highlights will
include a streamlined user interface, new opportunities for programming
automation, improved rest roughing, variable thickness machining and
more comprehensive collision checking. |
March 04 |
| Delcam France
to preview new PowerMILL CAM software at Industrie |
Delcam France will look to build on its successful 2003 at the Industrie
exhibition in Paris from 22nd to 26th March with a preview of the
new release of the company’s PowerMILL CAM software. The company
saw its sales increase by 120% over 2002, making it the fastest-growing
CADCAM company in the country and believes that the new PowerMILL
release will ensure even higher sales this year. |
March 04 |
| Delcam to preview
new jewellery design and manufacture software at Basel show |
At the Basel Watch and Jewellery Exhibition to be held from 15th
to 22nd April, Delcam will preview the latest version of its ArtCAM
JewelSmith software for the jewellery industry. The software is already
widely used by designers, model makers and manufacturers of all types
of jewellery, whether it is bespoke, custom-made pieces or mass-produced
items. In all cases, it has given improved productivity, higher quality
and significantly reduced lead times. |
March 04 |
| Delcam
to preview new jewellery design and manufacture software in Shanghai |
At the Jewelry Shanghai Exhibition to be held from 30th March to
2nd April, Delcam will preview the latest version of its ArtCAM JewelSmith
software for the jewellery industry. The software is already widely
used by designers, model makers and manufacturers of all types of
jewellery, whether it is bespoke, custom-made pieces or mass-produced
items. In all cases, it has given improved productivity, higher quality
and significantly reduced lead times. |
March 04 |
| Delcam to preview
new PowerMILL CAM software at MACH |
The main focus of Delcam’s stand at the MACH exhibition will
be a preview of the new release of the company’s PowerMILL CAM
software. PowerMILL 5.5 will incorporate a range of enhancements,
including the ability to use the stock model for five-axis machining
operations, dedicated methods for machining of flat surfaces, the
ability to use user-defined tools and collision checking within the
new simulation model. In addition, the user interface has been improved
with the use of Windows XP style icons and with the wider user of
colour to define different areas of the model.
|
February 04 |
| Delcam to launch
new PowerMILL CAM software at Metaltech |
At the Metaltech exhibition to be held in Kuala Lumpur, Malaysia,
from 12th to 16th May, Delcam will launch the new release of the company’s
PowerMILL CAM software. Asian companies will have their first chance
to see the wide range of enhancements in PowerMILL 5.5, including
the ability to use the stock model for five-axis machining operations,
dedicated methods for machining of flat surfaces, the ability to use
user-defined tools and collision checking within the new simulation
model. In addition, the user interface has been improved with the
use of Windows XP style icons and with the wider user of colour to
define different areas of the model. |
February 04 |
| Delcam
launches new PowerMILL
CAM software |
PowerMILL 5 will offer easier programming despite the inclusion
of an even wider range of strategies. Highlights will include a streamlined
user interface, new opportunities for programming automation, improved
rest roughing, variable thickness machining, more comprehensive collision
checking and a new simulation option. |
February 04 |
| Delcam
to host CADCAM Clinic at Packaging Innovation Show |
CADCAM developed Delcam is to host a CADCAM Clinic at the Packaging
Innovation Show to be held as part of the Total Processing and Packaging
exhibition at the NEC, Birmingham from 29th March to 2nd April. At
the Clinic, Delcam’s experts will demonstrate how modern computer-based
design and manufacturing techniques have enabled the company’s
customers in the packaging industry, such as Rexam, Graham Packaging,
RPC and Allied Glass, to produce more complex designs more quickly
and to a higher quality. |
January 04 |
| Delcam to demonstrate
latest five-axis machining techniques at Westec |
Delcam will demonstrate the latest five-axis machining techniques
in its PowerMILL CAM software on booth #2745 at the Westec Exhibition
in Los Angeles, California from March 22- 25, 2004. Visitors will
be shown how PowerMILL’s exceptional calculation speed and versatile
toolpath editing can shorten lead times, as will also be able to see
live machining demonstrations on a Hermle C30U milling machine. These
practical demonstrations will reinforce Delcam’s long?established
tradition of providing software that produces toolpaths that are not
only mathematically correct but which also run efficiently on the
machine tool. |
January 04 |
| Delcam to demonstrate
3D mould design at Indian exhibition |
Delcam will demonstrate the latest release of its PS-Moldmaker mould
design software at the Diemould India exhibition to be held in Mumbai
from 28th February to 2nd March. PS-Moldmaker provides a powerful,
highly-automated system that will allow designers of injection mould
tools to move from processes based on two-dimensional drawings to
new methods based on three-dimensional computer models. |
January 04 |
| Delcam
to show new morphing options in PowerSHAPE at Solid Modelling Show |
Delcam will demonstrate the extended range of morphing, or whole
model editing, options within its PowerSHAPE hybrid modeller at the
Solid Modelling Show to be held at the NEC, Birmingham, on 31st March
and 1st April. Additional options within the latest release of PowerSHAPE
include a new morphing method based on a control surface, the ability
to retain the shape of features wrapped onto an underlying surface
that is being modified, and the ability to undertake multiple morphs
of different types on a surface or solid. |
January 04 |
| Delcam
to preview new “Face Wizard” at Spring Fair |
At the Spring Fair to be held at Birmingham’s NEC from 1st
to 5th February, Delcam will preview new functionality in its ArtCAM
Pro artistic CADCAM software that will enable quick and easy creation
of CAD models of human face profiles from digital images. Once they
have been created, the faces will be able to be incorporated into
all manner of product designs, including plaques and medals, and the
whole range of bespoke items from signs to personalised jewellery. |
|
